INJ-300 Labscope Series - Advanced Diagnostics Part 5

In this class of the Labscope Series, we will detail the Advanced aspects of the scope usage. We are going to detail the different ways of using Ignition signals for cylinder reference and timing. We can no longer get primary and secondary signals on the newer Ignition coils.

This class is a must for those using Relative Compression testing and In Cylinder Pressure testing diagnostics.

COURSE OUTLINE

1. Introduction of the Advanced Automotive Labscope
2. Reviewing primary and secondary signals
3. Use of the Primary and Ignition signals:
   1. Engine Compression Testing and Set-up
   2. Transducer Cylinder and Vacuum-Fuel Analysis
4. Voltage and Current signal usage

In this class of the Labscope Series, we will go through scope set up. Tigger functions, AC/DC coupling, probe selection, current operation are detailed. We will see how Amplitude and sweep along with trigger affects the signals displayed. Schematic reading and waveform analysis.

View Course

In this EV series class, we focus on the types of batteries/cells and motors currently used in EV ?s. The construction of the different designs of lithium-Ion high voltage batteries and how they charge and store energy. We will look at the motor/generator systems. We will dissect motor types used in EV ?s and why these types are used for propulsion/braking.

View Course

Welcome to the new training series of Labscope classes. This first in the series course highlights the operation and usage of an Automotive Labscope. With automotive service centres now encountering advance Buss Communication systems along with advanced systems such as Anti-locking Brakes, Body Computer, and more complex Engine Management systems, the Labscope has become a mandatory diagnostic tool next to the Scan Tool and DVOM.

Do you understand what Input Coupling is? Does the term Scope and Trigger remind you of that last customer you just had?

View Course